Lockwood 3570 Series Lockwood 3570 Series Electric Mortice Lock Lockwood 3570 Series Electric Mortice Lock Designed and manufactured in Australia, the 3570 series electric mortice is a high performance lock of superior quality. It is constructed from high grade zinc alloy, with a stainless steel latch bolt and face plate and is suited for all commercial applications.The lock can be operated by push buttons, intercom systems and key switches; or integrated with electronic access control systems for use with higher security devices such as keypads or card readers. Key FeaturesDesigned with flexibility in mind, the one lock can cover all functions and is easily configured on site for the required application. Available in non monitored and monitored versions. Monitoring features: Dead latched and Locked Door position/Reed switch Dual key override monitoring Request to exit/REX LED indication Field Changeable settings: Fail safe/fail secure configuration. Multi-voltage - will work on 12-24 Vdc systems. Handing - left hand and right hand doors Selection of free lever or locked lever on both sides of the door Key override monitoring either side of the door Monitoring contacts - normally closed, normally open (for key override and requestto exit only) Standards and Compliance SL8 (Security) Australian Lock Standard (AS4145.2.2008) (when used with equivalent security level keying system) D8 (Durability) Australian Lock Standard (AS4145.2.2008) RCM Certified 3579 and 3579HS Series: SEC2011 Secure Area Specification Voltage12Vdc - 24Vdc Operating Voltage Current500mA (max) 80mA holding @ 12Vdc275mA (max) 50mA holding @ 24Vdc LED CurrentWhen LED's are fitted, add 15mA (max) to total current draw Monitoring Dual Key override Deadlatched Locked Door closed Request to exit Microswitches: 500mA (max) @ 30Vdc each circuit. Reedswitch: 100mA (max) @ 30Vdc EnvironmentOperational temperature range -20c to + 60c Case / CoverHigh purity Zinc alloy construction Backset60mm standard, 89 & 127 mm available Latch boltsReversible with Stainless Steel construction. Door Clearance3 - 6.5 mm Door thicknessStandard applications 32 to 50mm. CylinderStandard Lockwood oval shaped cylinders. Cabling1.6 metre length of cable with 12 pin socket supplied with each lock.Recommended cable: 18AWG (0.82mm²) cable runs up to 30m. FurnitureCompatible with Lockwood series door furniture. Standard FinishesSatin Chrome (SC) standard. Note: For detailed electrical specifications, refer to catalogue. Specification StatementThe lock should be capable of operation on voltages between 12 - 24Vdc and have a current consumption not more than 80mA (holding) @12Vdc and 50mA (holding) @24Vdc.Monitored locks must be capable of monitoring the following functions: Key override, door position / reed switch, selectable hub / Request to exit, & locking bar status.All monitoring outputs must have the ability to be wired independently.All settings - including: fail safe / fail secure, handing, hub selection must be field configurable. Close Download Electromechanical Door Solutions.pdf (.pdf, 6.5 MB) Lockwood Synergy Mortice Locks Catalogue.pdf (.pdf, 5.8 MB) Close Sargent 8200 Series Lockwood Selector® 3782 Series23mm, 25.4mm, 30mm and 38mm backset models available.