ES8000 V-Lock DropBolt Trimec ES8000 V-Lock Trimec ES8000 V-Lock The ES8000, also known as the V-lock is a high torque motorised bolt that moves from the vertical position to the horizontal state when locked. The bolt moves into the V shaped strike plate pulling the door aligned with the lock. The high torque motorised bolt can be concealed from view or surface mounted and has the worlds first fail-open motor locking mechanism. Slim design with classic satin stainless steel faceplate, and significant 7mm overall (+/- 3.5mm) door misalignment tolerance make ES8000 a product with great aesthetic appearance as well as easy installation. Features SIDE LOAD - PRE LOAD CapableLock will unlock with up to 15kg of side pressure, when wired in 3 wire mode. (1 x Permanent Power, (positive 12-24Vdc) wire. Negative (0 volt return) wire, and 1 x Switching input (positive 12-24Vdc) wire Door misalignment of up to 3.5mm +/- Power to Lock (Fail Safe) / Power to Open (Fail Secure) field configurable HIGH TORQUE Motorised locking and unlocking (3 wire mode) High Speed Operation. Unlocks in less than 1 second Surface Mount Accessory Kit. Ideal for 180° swing through glass door applications Multiple Orientation - Interior Doors Can be mounted vertically or horizontally (For exterior doors due to possible water ingress the ES8000 must be mounted horizontally) Applications Misaligned doors Timber doors Glass doors Standards and Compliance SCEC Endorsed (Intruder Resistant Bracket Required) Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 Part 1: Fire resistant door sets). CE Approved Specification Voltage12 to 24Vdc, Voltage Tolerance 12V (+15% - 0%) 24V(+/- 15%) CurrentMinimum 1 Amp Regulated Supply MonitoringCOM, NO, NC Voltage free changeover contacts rated at 48 dc/100mA SecurityPassed S3 (AS4145.2 -1993) StrengthMaximum 1000kg (with supported strike plate) Side LoadSide Load rated: Motorised Unlocking - 15kg max at boltFail Safe Unlocking - 3kg max at bolt Endurance300,000 operations EnvironmentOperational temperature range -20°C to + 60°C Lock BodyStainless Steel Lock Body and Faceplate Bolt11mm diameter, 20.5mm projection Specification StatementThe lock must be a high torque motorised bolt with Preload tolerance. The strike plate must be shaped in a V format to accommodate for misaligned doors. Lock will unlock with up to 15kg of side pressure and will be powered with 12-24v and draw no more than 1000mA. The lock must be configurable for Power to Lock (Fail Safe) or Power to Open (Fail Secure). The lock must be triggered with a magnet positioned in strike plate, and be monitored for locked unlocked and door position. Dimensions Close Download Electromechanical Bolts Catalogue Section.pdf (.pdf, 1.5 MB) ES8000 Installation.pdf (.pdf, 2.5 MB) Close ES110 Series StrikeFail safe/fail secure changeable on site. ES8200 Technilock DropBolt2500kg holding force. ES2100 Series Monitored Electric StrikeFail safe/fail secure changeable on site.